I've been playing with scraps and thought I'd share my Christmas card prototype.
I cut a whole bunch of strips of Basic Grey Christmas paper. The nice thing about most of BG's Christmas collections is that you can mix and match from year to year. And I have years and years' worth, believe me. I varied the width of the strips from 1/4" to 3/4" and every size in between. (It helps to make lots of strips of each size...that way if one strip doesn't reach the whole way across the paper, you can find another one the same width to put next to it.)
Then I ran a piece of cardstock through my Xyron machine to apply a solid coat of adhesive on one side. And I started laying strips down on the adhesive, scooching them up nice and tight against each other. I used 8.5x11" cardstock and ran the strips across the short side.
From this new sheet of striped paper, I cut a bunch of triangles that measured 2.5" at the base, and 3.5" tall. Then I cut each triangle in half lengthwise. When you have an assortment of triangles cut, put two halves together that are cut from different sections of the paper--so that they don't match up.
I rubbed distress ink on the edges of each half (Frayed Burlap) and mounted on a patterned paper background. Then I added a trunk (snipped from a brown scrap of Basic Grey paper so there's a subtle pattern) and a star and a stamped sentiment. Now I just need to make a few dozen of them!